Chat with Beacon about your real work

Ask in your own words, point Beacon at your records and files, choose how hard it thinks, and get answers with their sources and finished files back, all as you.

Talk to SaphionSee Beacon
7 min read

Most chat assistants start from a blank page. You paste in what they need to know, explain who the work is for, and carry the answer somewhere else to use it. Beacon’s chat starts where your work already is.

It can read your Projects, Actions, records, Dashboards and files. It can look things up outside Saphion. It can hand back a spreadsheet, a deck, a Word document or an image. And it does all of it as you: what Beacon can read and change is what you can open yourself, and nothing more.

Ask in your own words, and point at the exact thing

Choose Beacon in the sidebar and write your request. The box greets you by name and reads “Ask anything or start a task”. Press Enter to send, Shift and Enter for a new line, and the answer streams in as Beacon works.

Beacon does its best work when it knows the outcome you want, the material to use and what good looks like. “Read the files in this Project, list the questions they leave unanswered and say which file each comes from. Draft a reply for me to review” gives it all three.

  • Type @ to point Beacon at something exact. The list is grouped into Actions and records, Dashboards, Projects, People and Files, and shows what you opened lately until you start typing. You can mention only what you can open.
  • Type / to run a skill, a procedure you have saved. Teach Beacon your way of working, once says how.
  • Choose a Project under the box to file the chat there before you send anything. Beacon then uses that Project’s instructions, context and memory.

Beacon’s answers are a draft for you to check. Where it says it is unsure or could not read something, that is yours to resolve before you rely on the work.

Bring your files

Choose Add beside the box and then Add files, drag files onto the chat, or paste them into the box. Beacon reads what is in them and can refer back to them later in the same chat.

What one message can carry
LimitValue
Files on one messageUp to 10
Size of one fileUp to 100 MB
Size of all one message’s files togetherUp to 100 MB

If a file is not supported, is too large or goes over a limit, Saphion says which file was refused and why. The others are still added.

Which file types can I attach?
PDFs, Word files (.doc, .docx, .docm, .rtf, .odt), PowerPoint files (.pptx, .odp), spreadsheets (.xls, .xlsx, .xlsm, .xlsb, .ods, .csv), images (.png, .jpg, .jpeg, .webp, .gif, .svg), text files and common code files. A ZIP archive works too: Beacon lists what is inside and reads the files it needs.

Choose how hard Beacon thinks

The model button sits under the box, beside your usage ring. Beacon runs on three models, each described in the menu so you can choose by the job.

  • Spark for quick questions.
  • Beam for writing and everyday work.
  • Blaze for demanding analysis.

Which of them you can use depends on your plan. A model your plan does not include stays in the list and says why, so you are never left guessing.

Models by personal plan
PlanModels
StandardSpark
ProSpark, Beam and Blaze
MaxSpark, Beam and Blaze

Under the models, Effort sets how much care Beacon takes. Higher effort is more thorough, takes longer and uses your allowance faster. One level is marked Recommended and the highest is marked Higher usage, so the trade is on the menu rather than in the small print. Effort also sets the quality of any image Beacon makes in that chat.

Get finished work back, not only answers

Ask for an Excel workbook, a PowerPoint deck, a Word document or a PDF and Beacon builds the file, checks it and shows it in the chat. Ask for several in one request, or for a ZIP, and each file gets its own card. Everything a chat makes is in the Files button above it and in Creations.

To change a file Beacon made, ask in the same chat. It replaces the file with a new version rather than leaving you a second copy to tell apart.

Ask for an image from a description, such as “a landscape image of a harbour at dusk for the tender cover”, and say portrait or landscape if you want one. To change a picture you hold, name it or attach it. The image appears in the chat as a PNG and in Creations, and it is private to you until you share it. Images count against your monthly allowance, and if one cannot be made, Beacon says why.

See where an answer came from

When Beacon cites a record or a file, choose the source in the answer to open it. A record opens its own work, and a file opens the material the answer used. Access is checked as you open it, so a source you no longer have permission to read cannot be opened through the chat.

Beacon also looks outside Saphion when your question needs it, and cites what it used.

  • The web. It searches and reads the pages worth reading, unless an Admin has turned web search off for your Organisation. When a search fails, it says so rather than reporting that nothing was found.
  • UK legislation. Ask about a law and Beacon searches legislation.gov.uk, then reads the provision itself at its current version. The citation carries that version’s date and the publisher’s reuse terms.
  • Places. Ask for an address, a named place or a kind of place near somewhere, such as a hospital near a site address. Beacon shows it on a map in the chat, and can search near a place it found earlier.

Beacon stops to ask, and you can step in

Sometimes Beacon needs your answer before it goes on. A question appears above the box with numbered options and a “Something else” row. Choose one with the mouse, or press its number and then Enter. A chat that is waiting for you shows Needs your input in the sidebar, so you find it without opening each one.

Beacon asks exactly when the app would ask you. Reading, and changing a record you could change yourself, it does as you and records in Activity. Using a tool in a connected system follows that tool’s setting, and a tool that sends something to other people always needs approval: you choose Allow once or Deny. Sharing, Members, Invitations, Permissions and seat levels are things Beacon can do for you when you ask, and it always asks first, on a card that names who and what. Buying seats and changing your plan stay your own acts in the app.

When Beacon finishes an answer and offers a next step, a card underneath gives a short recap, a question and one or two reply buttons. Choose a button to carry on, or type your own reply and leave the card behind.

While Beacon works, the send button becomes Stop. If you type another message in the meantime, it reaches the work in progress as a change of direction, so you never wait for it to finish.

To ask about the Document, Whiteboard or Dashboard in front of you without opening a chat at all, see Beacon answers, asks and shows on the item.

Your chats are yours until you share them

A chat is private to you first, wherever it is filed. Hover over it in the sidebar, or choose its name at the top of an open chat, for a menu to rename, pin, move, share, archive or delete it.

  • Pin keeps a chat at the top of the sidebar under Pinned. Recents lists the rest, sorted by recent activity, newest created or title.
  • Move to Project files a chat under a Project, where it appears in the sidebar and on the Project’s Beacon page. Moving a chat does not change who can open it.
  • Share lets named people in your Organisation read the chat, as Viewers: they can open it, not add to it or change it. An Admin, or anyone who may share with the whole Organisation, can open it to everyone, to read. Sharing a chat never shares the files or records Beacon made in it, which have their own Share.
  • Archive takes a chat out of your lists and keeps it under Settings, Privacy, where you can bring it back.
  • Delete asks once, and a deleted chat is gone for good. Archive it if you might want it later.

A Project shares its instructions, files and memory with the people who can open it, but never anybody’s conversations.

Where to start

  1. Choose Beacon in the sidebar, or New chat.
  2. Type @ and choose a Project, a record or a file to point Beacon at.
  3. Say what you want, who it is for and what good looks like, and press Enter.
  4. Open a source to check the answer, or ask for the result as a file.

Chat with Beacon is part of every Platform seat. Spark is included on every personal plan, and Beam and Blaze come with Pro and Max. Read the whole of Chat with Beacon in the docs.

View all